Production and sales of capacitors and electronic components

Shinyei Capacitor Co., Ltd.

PRODUCTS

TAPING SPECIFICATION FOR AUTOMATIC INSERTION

Type Style-1 Style-2 Style-3
Item Symbol Dim. Dim. Dim.
Length. A 14.0 Max 24.0 Max 12.0 Max
Lead-wire diameter. d φ0.6~0.8(Refer to the individual spec.)
Component spacing. P 15.0±1.0 30.0±1.0 12.7±1.0
Pitch of the sprocket holes. P0 15.0±0.2 15.0±0.2 12.7±0.2
Distance between centers of terminal and sprocket hole. P2 7.5±1.0 7.5±1.0 6.35±1.0
Distance between centers of terminal and sprocket hole. P1 3.75±0.5 3.75±0.5 3.85±0.5
Distance between centers of component lead wire. F 7.5+0.8/−0.2 7.5+0.8/−0.2 5.0±0.8
Maximum lateral deviation of the component body vertical to the tape plane. ⊿h 0±1.0 0±1.0 0±1.0
Carrier tape width. W 18.0±0.5 18.0±0.5 18.0±0.5
Distance between the center of upper edges of carrier tape and sprocket hole. W1 9.0±0.5 9.0±0.5 9.0±0.5
Height of component from tape center. H 20.0±1.0 20.0±1.0 20.0±1.0
Distance between the abscissa and the reference plane of components with crimped leads. H0 16.0±0.5 16.0±0.5 16.0±0.5
Protrusion lead beyond carrier tape. I 1.0 Max 1.0 Max 1.0 Max
Diameter of sprocket holes. D0 4.0±0.2 4.0±0.2 4.0±0.2
Hold down tape width. W0 12.5 Min 12.5 Min 12.5 Min
Total thickness of the combined carrier tape and hold down tape. I 0.7±0.2 0.7±0.2 0.7±0.2
Cut off position of defectives. L 11.0 Max 11.0 Max 11.0 Max
Distance between the upper edges of carrier tape and the hole down tape. W2 3.0 Max 3.0 Max 3.0 Max
Distance between the abscissa and the top of the component body. H1 46.0 Max 48.0 Max 46.0 Max

Style

※For Rated Voltage & Capacitance Values. Taping available Range Please See Separate Individual  Specifications.