AES-CKMParticle Sensing Monitor
AES-CKM enables more accurate measurements in a clean environment with ISO Class 6 (Class 1,000).
It can detect both fine particles(over 0.5µm) and large particles(over 5µm) simultaneously.
This device can be used temporarily in a location without power supply, by connecting to the portable charger.
-
Capable to detect fine particles(over 0.5µm) and large particles(over 5µm) simultaneously.
-
Easy-to-check 4 step LED display for cleanliness level
-
Logging function is embedded.
-
5 different outputs or communication interfaces.
-
Continuous monitoring and quick notification of abnormalities.
-
Temperature and humidity sensor available as an option.
Key Features
Detect fine particles(over 0.5µm) and large particles(over 5µm) simultaneously.
AES-CKM can measure not only fine particles, which are crucial for cleanliness control, but also large particles that directly cause product quality defects. It simultaneously enables cleanliness monitoring and contamination control.
Easy-to-check 4 step LED display for cleanliness level Class 1,000 to 10,000.
Simple operability and the display offers visualizing cleanliness level easily.
-
Logging function is embedded
-
Capable of storing data for 3.5 days (84 hours, log interval: 1 minute). By connecting to portable charger(lasts for 12 hours at 5V/10,000mA), AES-CKM can be used temporarily in a location without power supply.
5 different outputs or communication interface.
Output/communication way can be selected from alarm output, Ethernet, Voltage output, Wifi and RS485.
Continuous monitoring and quick notification of abnormalities.
Continuous monitoring enables to notify abnormal event occurrence or process problem almost in real time
Temperature and humidity sensor available as an option.
By connecting Temperature and Humidity sensor (optional), the monitor can measure temperature and humidity constantly.
Line-up
Specification
| Model | AES-CKM | |||||
|---|---|---|---|---|---|---|
| Detectable Particle Size *1 | Over 0.5µm/ Over 5µm | |||||
| Optical Source | Laser Diode | |||||
| Measurement Range | ISO14644-1:2015 Class6-7 (Fed.Std.Class1,000 to Class10,000) | |||||
| Unit | pcs/m3(Default), pcs/cf, pcs/L(*2) | |||||
| Output/Interface | Alarm, Ethernet, Analog(1-5V), Wi-Fi, RS485 | |||||
| Measurement Time | 60s | |||||
| Data Update Time | 1s | |||||
| Memory Capacity | 128kB (Equivalent to 3.5 days) | |||||
| Power | +24V(Power terminal block)/+300mA(Max) +5V(Power supply Type-C conector)/+1A(Max) |
|||||
| Power Consumption (max) | 1.5A Max(7.5W Max) | |||||
| Operating Temperature | 0 to 40℃ | |||||
| Storage Temperature | -20 to 60℃ | |||||
| Operating Humidity | 30 to 80%rh | |||||
| Storage Humidity | Below 90%rh (No condensation) | |||||
| Weight | Approx. 510g | |||||
| Applicable Wire Size | AWG26 to 20 | |||||
- （*1）Calibration point is only at 0.5µm range