Dust sensor, suspended particle measurement equipment, PM2.5, air

Shinyei Technology

Particle Sensing

for embeddingParticle Sensor Unit

IAQ (indoor air quality) at a glance! Particle sensor to detect air-bourne particles in a room.
It is sensitive to dust, particles and cigarette smoke which can trigger many allergic symptoms.

Particle Sensor Unit [for embedding]

  • Particle Sensor UnitPPD71

    PPD71

    Based on the light scattering method, it detects airborne particles over 0.5μm (approx), then outputs the detection result in UART digital output based on mass concentration (μg/m3).

  • Particle Sensor UnitPPD42NJ

    PPD42NJ

    Based on the light scattering method, it always detects airborne particles over 1.0μm(approx).
    Pulse output that corresponds to concentration per unit volume of particles can be obtained, with using an original detection method based on light scattered principle similar to the particle counter.

  • Particle Sensor UnitPPD20V

    PPD20V

    Based on the light scattering method, it detects particles over 1.0µm(approx).
    An analog voltage signal that corresponds to concentration per unit volume of particles can be obtained, with using an original detection method based on light scattered principle similar to the particle counter.

  • Particle Sensor UnitPPD60PV-T2

    PPD60PV-T2

    Based on the light scattering method, same as particle counters, it detects air borne particles over 0.5μm(approx.), at cleanliness class from 100,000 to 1,000,000.